Uniline Electro-Mechanical Linear Actuators.
Belt driven actuator with a self aligning compact rail bearing system and a heavy duty linear motion axis.
The ED75 Uniline offers high speeds of up to 196"/sec. and high axial load capacities of up to 1951 lbs. and high My moments of 6160 in-lbs. design for a wide range of applications. The ED75 is prefect for applications where high speed and heavy loads work against most actuators. Working strokes over 20 ft. are standard.
With low noise and the ability to operate in contaminated environments, the Compact Rail system of the Uniline is constructed of large radial bearings that operate on a hardened steel surface. Its self aligning bearing system provides less maintenance and more cycles for the fabrication industry.
UNILINE is a family of linear actuators designed to facilitate the work of the design engineer. Assembled with only the best components, UNILINE actuators are of the highest quality. By specifying a UNILINE actuator, the design engineer must no longer spend time selecting, purchasing, and testing various components to provide linear movement. Instead, the designer is free to focus on those other parts of the machine that will set it apart from the competition.
The ED75 have a Compact "U"-rail mounted flat inside the profile and two Compact "U"-rails mounted externally; one on each side.
This configuration offers superior rigidity and is well suited for single axis applications or where a great moments are present.
All the load capacities are intended for single rail.
 view larger image |
 view larger image |
“L”-versions have a longer trolley mounted on two internal sliders instead of one.
The load and moment capacities obtainable, particularly the My and Mz, are much higher than those of the base versions.
All the load capacities are intended for single rail.
 view larger image |
 view larger image |
“D”-versions have an extra trolley connected to the first by a toothed belt.
The load and moment capacities obtainable, particularly the My and Mz, are much higher than those of the base versions.
All the load capacities are intended for single rail.
view larger image |
 view larger image |
