When compared to the massive 33 series from the competition, the SMI™ ECO33™ Stage is less than half the weight and at half the price.

To accomplish this feat, SMI™ developed a new light weight shafting called Hardcoat™ Shafting.

Hardcoat™ Shafting is made from light weight aluminum, precision ground SMI™ tolerances and then plated with a proprietary anodizing process. We then embed our Hardcoat™ Shafting into a light weight 6061 aluminum cross section designed to handle the loads you require and preload our SMI™ polymer bearings against the Hardcoat™ for minimal clearance and maximum rigidity.

By combining our Hardcoat™ Shafting with SMI™ polymer bearings no lubrication is required for most typical applications.

We also add a Stainless Steel leadscrew with a self-lubricating thermoplastic drive nut and stainless steel end support bearings and again lubrication is not required.

Adding a 6061 aluminum stage body and carriage block with their black anodized plating, and the entire ECO33™ becomes corrosion resistant and lubrication free.
*Note: high speed and wash down applications will require special lubricants and attention.  Motor must be rated for wash down and wet applications.

Call SMI™ Engineering for assistance for extreme environments.

• 1.29” height dimension from base to carriage top
• 1.85” height from base to motor top surface
• 2.36” at its widest dimension

Stout carriage houses preloaded sliding polymer bearings and self-lubricating thermoplastic nut drive unit in a very small envelope.

The SMI™ ECO33™ can be mounted horizontally or vertically or even inverted without loss of capacity. The ECO33™ can be configured in single axis or joined for multi axis applications with SMI™ optional mounting plates.

The ECO33™ is easily converted to any travel length required up to 36” without the needless “Custom” charges others apply to unusual lengths.

The SMI™ ECO33™ is a great platform to easily adapt to your special requirements such as end of travel limit switches, glass scales, covers or special mounting requirement.

Call SMI™ Engineering for load/ life assistance based upon your exact needs and environment.

Utilizing SMI™ Hardcoat™ Shafting, Polymer bearings and leadscrew package, the ECO33™ can handle compressive loads up to 130 lbs. delivered over 2 million linear inches of life time travel.

As with all SMI™ Stages and systems, we offer complete packages for single axis to multi-axis systems.

These packages include power supplies, indexer, controllers, joy stick controls, remote controls and even foot controlled systems.

For more details and to begin creating your complete mechanical motion controlled solution contact an SMI™ sales respresentative.