Volume Discounts Available

Complete Fully Integrated Packages. Built and Ready to Go Out of the Box.


Fully Integrated Linear Motion Systems Packages
Complete Integrated
Packages



Wired Only Integration for Linear Actuators for complete Integrated Package
Wired Only Integration

Thomson Electrak Push Pull Linear Actuators are Strong, Robust and Reliable

Rollon Uniline SeriesThe Electrak Series is the newest line of precision linear actuators from Thomson™. The Electrak are built to be strong, robust and reliable, yet at a very low cost. The Electrak linear actuators are easily interchanged with comparably sized hydraulic or pneumatic cylinders typically used in intermittent duty situations. The Electrak linear actuators are available standard with stroke lengths of up to 36 inches, speeds up to 3.0 in/sec, and static load ratings to 2000 lbf.

  • Compact, Lightweight, Small, Quiet
  • Corrosion Resistant Housing
  • Self-locking ACME Screw Drive System
  • Maintenance Free
  • Low Cost
  • Static Loads up to 2000 lbf.
  • Stroke Length up to 36 in.

The Electrak are available in both DC (12, 24, 36) and AC (115, 230, 400) voltage models, these actuators come optionally packaged with a wide selection of controls and accessories. All our linear actuators have the reliability, accuracy and functionality flexibility to suit almost any application with guaranteed trouble-free operation in the toughest environments.

 

Model
 Maximum Speed
(in/sec)
 Maximum Stroke
Length (in.)
 Maximum Dynamic Load (lbf)
  
Electrak 1
 3.0 6 75 The Electrak 1 actuators are easily interchanged with comparably sized hydraulic or pneumatic cylinders typically used in intermittent duty situations. Made for light, short stroke, and small space applications, these units come in 12, 24, and 36 VDC versions. These acme screw driven actuators come in stroke lengths customizable to 150 mm (6 in) and can push or pull loads up to 340 N (75 lbf) and with no-load speeds ranging to 75 mm/s (3.0 in/s). Available with either limit switches or a feedback potentiometer.
Electrak 1SP
 3.0 6 75 The Electrak 1 actuators are easily interchanged with comparably sized hydraulic or pneumatic cylinders typically used in intermittent duty situations. Made for light, short stroke, and small space applications, these units come in 12, 24, and 36 VDC versions. These acme screw driven actuators come in stroke lengths customizable to 150 mm (6 in) and can push or pull loads up to 340 N (75 lbf) and with no-load speeds ranging to 75 mm/s (3.0 in/s). Available with either limit switches or a feedback potentiometer.
Electrak 050
 1.9 8 112 The Electrak 050 is a compact, quiet, and low-priced DC actuator suitable for a variety of markets and applications. Available in 12, 24, and 36 VDC models, these actuators can push or pull loads up to 510 N (112 lbf) and hold loads up to 1020 N (224 lbf). Built-in end of stroke limit switches and stroke lengths customizable up to 200 mm (8 in). Durable and corrosion free black or white housing.
Electrak 2
 1.2 24 250 The Electrak 2 linear acme screw driven actuator is an economical model designed for relatively light load applications. Powered by 12 VDC, these units can push or pull loads up to 1110 N (250 lbf) while moving at no load speeds of 30 mm/s (1.2 in/s) and hold loads up to 4450 N (1000 lbf). Stroke lengths are customizable to 610 mm (24 in).
Electrak PPA-DC
 1.3 36 1500 The Electrak 2 linear acme screw driven actuator is an economical model designed for relatively light load applications. Powered by 12 VDC, these units can push or pull loads up to 1110 N (250 lbf) while moving at no load speeds of 30 mm/s (1.2 in/s) and hold loads up to 4450 N (1000 lbf). Stroke lengths are customizable to 610 mm (24 in).
Electrak 10
 2.4 24 1500 The Electrak 10 actuators incorporate a robust, strong and reliable screw drive system for applications requiring maximum load capacity. Able to withstand very harsh environments with a stainless steel extension tube, these actuators come in 12, 24, 36 VDC versions and can push or pull loads up to 6800 N (1500 lbf) while holding loads up to 18000 N (4050 lbf). No-load maximum speeds are also possible up to 61 mm/s (2.4 in/s) and stroke lengths up to 610 mm (24 in).
Electrak PRO
 2.0 12 2000 The Electrak® Pro Series, its newest line of linear actuators. This family stands alone when it comes to the toughest and most demanding applications. Available in 12 or 24 VDC models with customizable stroke lengths up to 300 mm (12 in), these units can push or pull loads up to 9000 N (2000 lbf) at speeds of 43 mm/s (1.7 in/s) and hold loads up to 18000 N (4000 lbf).
Electrak PPA-AC
 0.6 36 1500 Electrak PPA-AC Performance Pak Actuators are strong, heavy duty units that can run at higher duty cycles. Incorporating a highly efficient ball screw drive system, these actuators have stroke lenghts customizable to 910 mm (36 in) and offer standard trunnion mounting and an integrated motor capacitor. Obtainable in 115 or 230 VAC versions and no-load speeds up to 16 mm/s (.63 in/s), these actuators can push and pull loads up to 6670 N (1500 lbf) and hold loads to 13350 N (3000 lbf).
Electrak 5
 2.1 24 1500 The Electrak 5 actuator is designed for intermittent duty applications. With acme and ball screw driven options and powered with either 115, 230, or 400 VAC, these actuators can push or pull loads up to 6800 N (1500 lbf) and hold loads up to 18000 N (4050 lbf). Maximum no-load speeds are attainable to 60 mm/s (2.4 in/s) and stroke lengths reaching to 610 mm (24 in). Control these units either through a simple push-button switch or through a control unit.
Electrak 205
 2.1 24 1500 Electrak 205 actuators feature multi-step positioning capability through a 10-turn potentiometer for precise feedback control when used with the correct actuator control systems. With adjustable integral limit switches, the automatic shut off travel range can be easily adjusted. These actuators can be powered with either 115 or 230 VAC and push or pull up to 6800 N (1500 lbf) while holding loads to 17800 N (4000 lbf). No-load maximum speeds are also possible up to 52 mm/s (2.05 in/s) and stroke lengths up to 610 mm (24 in).
WhisperTrak Electric
 2.1 19 450 Thomson WhisperTrak Electric Push Pull Linear Actuator
linear motion systems quote request

Fully Built & Ready To Go or Add Full Integration for Complete Package.



SMI XLA15 and XLA19 Profile Rail Actuators
XLA Series
Profile Rail Systems


Specialty Motions Miniature MP Series Profile Rail Actuators
MP Series
Profile Rail Systems


Sliding Element Systems-Slick Stick, ECO33, Twinlite
Sliding Element Systems



You are here:   HomeMotion SystemsPush & Pull Actuators

Specialty Motions, Inc.
1801 Railroad Street, Corona, CA 92880
Tel: (951) 735-8722 | (800) 283-3411
Fax: (951) 735-8915

Monday - Friday 7:30AM to 4:30PM PST

www.smi4motion.com
sales@smi4motion.com


  Like Us On:

Industry Serviced

  • Aerospace
  • Factory Automation
  • Food Industry
  • Industrial
  • Manufacturing
  • Medical Equipment
  • Motion Pictures
  • Optical / Optimation
  • Packaging Companies
  • Photonics
  • Robotics
  • System Manufacturing
  • Universities
  • and more...


Manufacturers

  • THK
  • Thomson
  • Danaher
  • NB
  • Rollon
  • NSK
  • Oriental Motor
  • and More...


Clients

  • NASA
  • Apple
  • Hewlett Packard
  • MIT
  • Bose
  • John Force Racing