The Electrak 050 is a compact, quiet, and low-priced DC actuator suitable for a variety of markets and applications. Available in 12, 24, and 36 VDC models, these actuators can push or pull loads up to 510 N (112 lbf) and hold loads up to 1020 N (224 lbf). Built-in end of stroke limit switches and stroke lengths customizable up to 200 mm (8 in). Durable and corrosion free black or white housing.
Standard Features and Benefits
- 12, 24 and 36 Vdc - load up to 112 lbf
- Designed for office or medical applications
- Small, quiet and lightweight
- Very short retracted length
- Low cost
- Durable and corrosion free plastic housing
- Color molded into the plastic, no painting required
- End of stroke limit switches with dynamic braking
- Maintenance free
- Internally restrained extension tube
- Estimated life is minimum 40000 cycles
- Q-version for noise sensitive applications
|
Parameter
|
Electrak 050
|
| Screw type |
worm |
| Internally restrained |
yes |
| Manual override |
no |
| Dynamic braking |
yes, at end of stroke |
| Holding brake |
no, self-locking |
| End of stroke protection |
internal limit switches |
| Mid stroke protection |
overload clutch |
| Motor protection |
auto reset thermal switch |
| Motor connection |
flying leads and connector |
| Motor connector |
Packard Electric Pack-Con male 8911773 with terminal 6294511. Mating connector: 8911772 with terminal 12040508 |
| Certificates |
CE optional* |
| Options |
- potentiometer 10k0hm*
-cross holes rotated 90
- white housing |
| * Contact customer support |
|
|
Parameter
|
|
Electrak 050
|
Maximum load, dynamic / static
DE • • • 17W41
DE • • • 17W42
DE • • • 17W44 |
[lbf]
|
112 / 224
60 / 120
30 / 60
|
Speed, at no load / at maximum load
DE • • - 17W41
DE • • - 17W42
DE • • - 17W44
DE • • Q17W41
DE • • Q17W42
DE • • Q17W44 |
[in/sec]
|
0.48 / 0.37
0.95 / 0.72
1.90 / 1.45
0.36 / 0.30
0.70 / 0.55
1.50 / 1.20
|
| Available input voltages |
[Vdc]
|
12, 24, 36
|
| Standard stroke lengths |
[in]
|
2, 4, 6, 8
|
| Operating temperature limits |
[°F]
|
-30 – +180
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| End play, maximum |
[in]
|
0.06
|
| Restraining torque |
[lbf-in]
|
0
|
| Lead cross section |
[AWG]
|
18
|
| Lead length |
[in]
|
6
|
Protection class
standar version
Q-version |
|
IP56
IP51
|
Potentiometer resistance change
DE • • • 17W41
DE • • • 17W42
DE • • • 17W44 |
[ohm/in]
|
560
556
540
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
DE24 -
|
17W44 -
|
06
|
FN
|
HH
|
N
|
1. Model and input voltage
DE12 - = Electrak 050, 12 Vdc
DE24 - = Electrak 050, 24 Vdc
DE36 - = Electrak 050, 36 Vdc
DE24Q = Electrak 050, 24 Vdc, Q-version
2. Dynamic load capacity
17W41 - = 112 lbf
17W42 - = 60 lbf
17W44 - = 30 lbf |
3. Stroke
02 = 2 inch
04 = 4 inch
06 = 6 inch
08 = 8 inch
4. End of stroke limit switches and potentiometer
FN = limit switches and no potentiometer
FP = limit switches and potentiometer(1) |
5. Rear and front mounting
HH = standard crosshole in both ends
MH = crossholes rotated 90°
6. Color
N = black housing
W = white housing
(1) Not possible in combination with 8 inch stroke. |
