Complete Fully Integrated Packages. Built and Ready to Go Out of the Box.
Complete Integrated
Packages
Wired Only Integration
|
Thomson Electrak 2 Push Pull Linear Actuator
 The Electrak 2 linear acme screw driven actuator is an economical model designed for relatively light load applications. Powered by 12 VDC, these units can push or pull loads up to 1110 N (250 lbf) while moving at no load speeds of 30 mm/s (1.2 in/s) and hold loads up to 4450 N (1000 lbf). Stroke lengths are customizable to 610 mm (24 in).
Standard Features and Benefits
- 12 Vdc - load up to 250 lbf
- Economical and robust actuator for medium loads
- Stainless steel extension tube
- Self-locking acme screw drive system
- Overload clutch for mid and end of stroke protection
- Motor with thermal switch
- Maintenance free
|
Parameter
|
Electrak 2
|
| Screw type |
acme |
| Internally restrained |
no |
| Manual override |
no, optional |
| Dynamic braking |
no |
| Holding brake |
no, self-locking |
| End of stroke protection |
overload clutch |
| Mid stroke protection |
overload clutch |
| Motor protection |
auto reset thermal switch |
| Motor connection |
flying leads and connector |
| Motor connector |
Packard Electric 56 series 2984883
with terminal 2962987. Mating
connector: 2973781 with terminal
2962573 (p/n 9100-448-001) |
| Certificates |
CE optional* |
| Options |
- potentiometer*
- manual override*
- limit switches* |
| * Contact customer support |
|
|
Parameter
|
|
Electrak 2
|
| Maximum load, dynamic / static |
[lbf]
|
250 / 1000
|
Speed, at no load / at maximum load
D12-10A5 (high speed)
D12-20A5 (standard speed) |
[in/sec]
|
1.20 / 1.00
0.61 / 0.55
|
| Available input voltages |
[Vdc]
|
12
|
| Standard stroke lengths |
[in]
|
4, 8, 12,
18*, 24*
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| End play, maximum |
[in]
|
0.08
|
| Restraining torque |
[lbf-in]
|
65
|
| Lead cross section |
[AWG]
|
14
|
| Lead length |
[in]
|
7.5
|
| Protection class |
|
IP56
|
| * Contact customer support |
|
|
|
1
|
2
|
3
|
4
|
|
D12 -
|
20A5 -
|
12
|
D
|
1. Input voltage
D12 - = 12 Vdc
2. Dynamic load capacity and speed
10A5 - = 250 lbf, high speed
20A5 - = 250 lbf, standard speed |
3. Stroke(1)
04 = 4 inch
08 = 8 inch
12 = 12 inch |
4. Shipment version(2)
D = distributor version
(1)Contact customer service for other stroke
lengths.
(2)Contact customer support for OEM version. |
|
Fully Built & Ready To Go or Add Full Integration for Complete Package.
XLA Series
Profile Rail Systems
MP Series
Profile Rail Systems
Sliding Element Systems
|
