Electrak 205 actuators feature multi-step positioning capability through a 10-turn potentiometer for precise feedback control when used with the correct actuator control systems. With adjustable integral limit switches, the automatic shut off travel range can be easily adjusted. These actuators can be powered with either 115 or 230 VAC and push or pull up to 6800 N (1500 lbf) while holding loads to 17800 N (4000 lbf). No-load maximum speeds are also possible up to 52 mm/s (2.05 in/s) and stroke lengths up to 610 mm (24 in).
Standard Features and Benefits
- 115 and 230 Vac - load up to 1500 lbf
- Robust, strong and reliable
- Stainless steel extension tube
- Highly efficient ball screw drive system
- Electrical brake for accurate positioning
- Motor with thermal switch
- Adjustable end of stroke limit switches
- Potentiometer
- Universal mounting clamp for tube mounting included
- Maintenance free
|
Parameter
|
Electrak 205
|
| Screw type |
ball |
| Internally restrained |
no |
| Manual override |
no |
| Dynamic braking |
no |
| Holding brake |
yes |
| End of stroke protection |
adjustable limit switches |
| Mid stroke protection |
no |
| Motor protection |
auto reset thermal switch |
| Motor connection |
terminal strip in the housing |
| Cable entrance |
1/2” NPT |
| Certificates |
none |
| Options |
none |
|
Parameter
|
|
|
Maximum load, dynamic / static
A • • -05B5
A • • -10B5
Contact customer support |
[lbf]
|
500
1000
1500
|
Maximum load, static tension
ALP • • - • • |
[lbf]
|
4000
|
Maximum load, static compression
ALP • • - • • (stroke under 24 inch)
ALP • • - • • (24 inch stroke) |
[lbf]
|
4000
2500
|
Speed, at no load / at maximum load
ALP • • -05
ALP • • -10 |
[in/sec]
|
2.05 / 1.75
1.10 / 0.90
|
Available input voltages*
Single phase |
[Vac]
|
115, 230
|
Input frequency
1 × 120 Vac model
1 × 230 Vac model |
[Hz]
|
60
50/60
|
| Standard Stroke lengths |
[in]
|
4, 8, 12,
18, 24
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| End play, maximum |
[in]
|
0.035
|
| Restraining torque |
[lbf-in]
|
100
|
| Max. terminal strip lead cross section |
[AWG]
|
14
|
| Protection class |
|
IP45
|
| Potentiometer |
[k0hm]
|
10
|
| Potentiometer resistance change |
[ohm/in]
|
385
|
* Capacitor required to run the actuator. 115 Vac = 35 μF, p/n 9200-448-002,
230 Vac = 10 μF, p/n 9200-448-003. |
|
1
|
2
|
3
|
4
|
|
ALP22 -
|
10B5 -
|
04
|
|
1. Model and input voltage
ALP12 - = Electrak 205, 1 × 115 Vac
ALP22 - = Electrak 205, 1 × 230 Vac |
2. Dynamic load capacity
05B5 - = 500 lbf
10B5 - = 1000 lbf |
3. Stroke
04 = 4 inch
08 = 8 inch
12 = 12 inch
18 = 18 inch
24 = 24 inch |
4. Shipment version(1)
D = distributor version
(1)Leave position blank for OEM version. |
