The Electrak 5 actuator is designed for intermittent duty applications. With acme and ball screw driven options and powered with either 115, 230, or 400 VAC, these actuators can push or pull loads up to 6800 N (1500 lbf) and hold loads up to 18000 N (4050 lbf). Maximum no-load speeds are attainable to 60 mm/s (2.4 in/s) and stroke lengths reaching to 610 mm (24 in). Control these units either through a simple push-button switch or through a control unit.
Standard Features and Benefits
- 115 and 230 Vac - load up to 1500 lbf
- Robust, strong and reliable
- Stainless steel extension tube
- Highly efficient ball screw drive system
- Overload clutch for mid and end of stroke protection
- Heavy duty motor with thermal switch
- Anti-coast brake for repeatable positioning
- Maintenance free
|
Parameter
|
Electrak 5
|
| Screw type |
ball |
| Internally restrained |
no |
| Manual override |
no, optional |
| Dynamic braking |
no |
| Holding brake |
yes |
| End of stroke protection |
overload clutch |
| Mid stroke protection |
overload clutch |
| Motor protection |
auto reset thermal switch |
| Motor connection |
cable and connector |
| Motor connector |
Packard Electric 56 series 2984883
with terminal 2962987. Mating
connector: 2973781 with terminal
2962573 (p/n 9100-448-001). |
| Certificates |
UL, CSA, CE optional* |
| Options |
- potentiometer*
- manual override*
- limit switches* |
| * Contact customer support |
|
|
Parameter
|
|
Electrak 5
|
Maximum load, dynamic / static
A • • -05B5
A • • -10B5
Contact customer support |
[lbf]
|
500 / 2500
1000 / 2500
1500 / 2500
|
Speed, at no load / at maximum load
A • • -05B5
A • • -10B5 |
[in/sec]
|
2.10 / 1.70
1.10 / 1.00
|
Available input voltages*
Single phase |
[Vac]
|
115, 230
|
Input frequency
1 × 115 Vac model
1 × 230 Vac model |
[Hz]
|
60
50/60
|
| Standard Stroke lengths |
[in]
|
4, 8, 12,
18, 24
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
25
|
| Maximum on time |
[sec]
|
45
|
| End play, maximum |
[in]
|
0.04
|
| Restraining torque |
[lbf-in]
|
100
|
| Lead cross section |
[AWG]
|
18
|
| Lead length |
[in]
|
23
|
| Protection class |
|
IP45
|
* Capacitor required to run the actuator. 115 Vac = 35 μF, p/n 9200-448-002,
230 Vac = 10 μF, p/n 9200-448-003t |
|
1
|
2
|
3
|
4
|
|
A12 -
|
05B5 -
|
04
|
D
|
1. Model and input voltage
A12 - = Electrak 5, 1 × 115 Vac
A22 - = Electrak 5, 1 × 230 Vac |
2. Dynamic load capacity
05B5 - = 500 lbf
10B5 - = 1000 lbf |
3. Stroke
04 = 4 inch
08 = 8 inch
12 = 12 inch
18 = 18 inch
24 = 24 inch |
4. Shipment version(1)
D = distributor version
(1)Leave position blank for OEM
version. |
