Complete Fully Integrated Packages. Built and Ready to Go Out of the Box.
Complete Integrated
Packages
Wired Only Integration
|
Thomson Electrak PPA-AC Push Pull Linear Actuator
 Electrak PPA-AC Performance Pak Actuators are strong, heavy duty units that can run at higher duty cycles. Incorporating a highly efficient ball screw drive system, these actuators have stroke lenghts customizable to 910 mm (36 in) and offer standard trunnion mounting and an integrated motor capacitor. Obtainable in 115 or 230 VAC versions and no-load speeds up to 16 mm/s (.63 in/s), these actuators can push and pull loads up to 6670 N (1500 lbf) and hold loads to 13350 N (3000 lbf).
Standard Features and Benefits
- 115 and 230 Vac - load up to 1500 lbf
- Strong and versatile heavy duty actuator
- High duty cycle
- Highly efficient ball screw drive system
- Overload clutch for mid and end of stroke protection
- Stroke lengths up to 36 inch
- Motor with thermal switch
- Integrated motor capacitor
- Maintenance free
- Large range of options
|
Parameter
|
Electrak PPA-AC
|
| Screw type |
ball |
| Internally restrained |
no |
| Manual override |
no, optional |
| Dynamic braking |
no |
| Holding brake |
yes |
| End of stroke protection |
overload clutch |
| Mid stroke protection |
overload clutch |
| Motor protection |
auto reset thermal switch |
| Motor connection |
flying leads |
| Motor connector |
no |
| Certificates |
CE optional* |
| Options |
- end of stroke limit switches
- potentiometer
- encoder
- protective bellows
- anti-coast brake
- electrical brake**
- manual override* |
* Contact customer support
** Only possible on 115 Vac models |
|
|
Parameter
|
|
Electrak PPA-AC
|
Maximum load, dynamic / static
PPA • • -18B65
PPA • • -58B65 |
[lbf]
|
500 / 3000
1500 / 3000
|
Speed, at no load / at maximum load
PPA11-18B65
PPA22-18B65
PPA • • -58B65 |
[in/sec]
|
0.63 / 0.60
0.55 / 0.50
0.17 / 0.17
|
| Available input voltages |
[Vac]
|
115, 230
|
Input frequency
1 × 115 Vac model
1 × 230 Vac model |
[Hz]
|
50/60
50/60
|
| Standard Stroke lengths |
[in]
|
4, 8, 12,
18, 24, 36
|
| Operating temperature limits |
[°F]
|
-15 – +150
|
| Full load duty cycle @ 77 °F |
[%]
|
30
|
| End play, maximum |
[in]
|
0.040
|
Restraining torque
PPA • • -18B65
PPA • • -58B65 |
[lbf-in]
|
100
200
|
| Lead cross section |
[AWG]
|
18
|
| Lead length |
[in]
|
19.5
|
| Protection class |
|
IP45
|
|
1
|
2
|
3
|
4
|
5
|
6
|
|
PPA22 -
|
18B65 -
|
18
|
SB
|
XX
|
C
|
1. Model and input voltage
PPA11 - = Electrak PPA-AC, 1 × 115 Vac
PPA22 - = Electrak PPA-AC, 1 × 230 Vac
2. Dynamic load capacity
18B65 - = 500 lbf
58B65 - = 1500 lbf |
3. Stroke
04 = 4 inch
08 = 8 inch
12 = 12 inch
18 = 18 inch
24 = 24 inch
36 = 36 inch
4. Brake option(1)
N - = no brake option
SB = anti coast brake
EB = electrical brake(2) |
5. Feedback option
XX = no feedback option
LS = end of stroke limit switches
PO = potentiometer(3)
HS = encoder
HL = encoder + end of stroke limit switches
6. Bellows option
X = no bellows
C = bellows(4)
(1)See “Brake” in the Glossary section on page 74
for more information.
(2)Only possible for 1 × 115 Vac models.
(3)Not available with limit switches.
(4)Only possible on 12 inch stroke or longer. |
|
Fully Built & Ready To Go or Add Full Integration for Complete Package.
XLA Series
Profile Rail Systems
MP Series
Profile Rail Systems
Sliding Element Systems
|
